Frequently Asked Questions

It allows the pressure generated by the operation in gear systems to be released outside, preventing damage to the seals.

To ensure proper operation, ventilation plugs must be installed above the oil level.

The red safety seal prevents oil leakage from the gearbox due to tilting or vibrations during transport and handling. It must be removed before use.

It collects metal particles generated by the friction between gears in the system, helping to keep the oil clean.

If the system temperature is 90 degrees Celsius or lower, neodymium magnetic plugs should be used.

For temperatures above 100 degrees Celsius, ferrite magnetic plugs are recommended.

They allow visual inspection of the oil level in closed systems, ensuring it is at an appropriate level.

If the temperature is below 100 degrees Celsius, plastic glass plugs should be used.

For temperatures above 100 degrees Celsius, heat-resistant and pressure-resistant glass indicator plugs should be used.

• There should be no indentations on the plastic head.
• The metal part must have a 3M application.
• The torque resistance must be suitable to prevent the plastic from stripping, and this should be documented.
• There should be a measurement point on the bolt to measure the voltage of the battery.