- +90 212 667 62 56
- Bolts, Rivets and Special Fasteners
It is manufactured by Tuna Vida to be used to relieve pressure between 0.150-0.250 bar in reducers and gearboxes.
This plug produced by our company is manufactured to evacuate excess air from the hole drilled in case the oil pressure in the reducer reaches 150-250 millibars. The plug is adjusted to remain closed until the pressure of 150-250 millibars so that the oil inside does not flow during transportation.
Usage areas:
It can be used in electric motor reducers and all required gear boxes and systems.
Operating Temperature Range:
Works at temperatures between -20 C - + 100 C.
Operating Pressure Range:
0.15 – 0.25 Bar
Assembly:
It must be mounted on top.
▸ Material
▸ Body : Brass
▸ Breather Cap :Brass
▸ Seal Valves Core : Brass Core With FKM
▸ Stainless Spring
▸ Working pressure: 0,15-0,25 Bar
▸ Max. Temp. Working
▸ A: -40 C /100 C
▸ B : -20 C /180 C
▸ Accessories on request
▸ Other materials
▸ Other Working pressure
▸ Red Core
D | D1 | D2 | L | L1 | HEX | |
M10X1 | G 1/8" | 14 | 12,5 | 23 | 8 | 13 |
M12X1,25 |
| 18 | 12,5 | 23 | 8 | 13 |
M14X1,5 | G 1/4" | 18 | 12,5 | 23 | 10 | 13 |
M16X1,5 | G 3/8" | 22 | 12,5 | 24 | 10 | 17 |
M18X1,5 |
| 24 | 12,5 | 24 | 10 | 17 |
M20X1,5 | G 1/2" | 24 | 12,5 | 24 | 10 | 19 |
M22X1,5 |
| 27 | 12,5 | 26 | 10 | 19 |
M27X1,5 | G 3/4" | 32 | 12,5 | 31 | 13 | 24 |
M33X2 | G 1" | 39 | 12,5 | 31 | 13 | 24 |
